Steps to complete printer setup on 123.hp.com/setup 3830

You can achieve the setup of your printer on the support website 123.hp.com/setup with the help of the following guidelines.

Unboxing the printer

• Held together by tapes, clips and other packing materials, the printer will come in a box which have to be removed first
• Make sure that you are able to freely open the upper lid to reveal the scanner glass so that you can handle the ink cartridge section
• Along with its exterior door check the ink cartridge access door
• Finally, for such packing materials check the inside of the printer

123.hp.com/setup 3830 - HP OfficeJet 3830, DeskJet 3830 Printers

Basic settings

• You need to set it up on a flat surface in order to power up the device
• Then, into the printer and also to the power source simultaneously, insert the power cord
• To power on the device, use the power button
• You must adjust a few settings after the control panel display gives you a welcome message
• Select the country or region to which you belong after choosing the language of your choice
• Eventually, select the date and time specific to your region
• You can confirm all your selections with the DONE option

Install Ink Cartridges

• For any printer model, ink cartridges are one of the most delicate components
• Each taped and sealed to prevent leakages, it arrives with a tri-color cartridge and a black cartridge
• However, before installing the cartridges in their respective slots you must remove these protective tapes and clips
• The ink nozzles or the copper contacts are quite sensitive components which have to be removed before insertion into the printer
• If you insert the cartridge correctly, you will hear a snapping sound
• Close the cartridge access door once you finish inserting the cartridges one after the other 

123.hp.com/setup 3830 - HP OfficeJet 3830, DeskJet 3830 Printers from u/alexatjones